hot-melt adhesive
英 [hɒt melt ədˈhiːsɪv]
美 [hɑːt melt ədˈhiːsɪv]
网络 热熔胶黏剂; 热熔胶; 热熔胶粘剂; 热熔黏合剂; 热熔粘接剂
双语例句
- The title polyamide hot-melt adhesive has been prepared by modification of domestic dimer acid PA with wasted PET, which can meet the demands of heat shrinkable joint closure, TV and vehicles.
利用废弃对苯二甲酸乙二醇酯（PET）对国产二聚酸型聚酰胺（PA）进行改性，合成了满足热缩材料、电视机和汽车等领域使用要求的聚酰胺热熔胶。 - The heat seal connector is made of coating layer that is consisted in conductive particulate dispersed in hot-melt adhesive on printed circuit polyester film.
热压密封连接器是在聚酯膜上印刷导电线路后，涂覆一层分散有导电微粒并具有热熔性的胶粘层而组成。 - But the biodegradable hot-melt adhesive, which was accordant with environmental protection concepts, had biggish potential market.
而可生物降解型热熔胶，符合环保理念，潜在市场大。 - Two-shot binding: Adhesive binding in which the first application is of PVA adhesive, the second of hot-melt adhesive.
两次胶胶装：第一次涂聚乙烯醇（白胶浆），第二次涂热熔胶的胶装方式。 - Synthesis of Polyester Hot-Melt Adhesive for Aluminium Foils Packaging for Medicine
药品包装铝箱用聚酯热熔粘合剂的合成 - In this paper, the synthesis, properties, applications, the latest research advancements and the developments of biodegradable hot-melt adhesive are reviewed.
综述了近年来可生物降解热熔胶的发展、合成、性能、应用、最新的研究进展。 - The recent research developments of hot-melt adhesive were introduced from traditional and biodegradable aspects.
从传统型和可生物降解型两个方面介绍了热熔胶的研究进展。 - Moreover, the further research and development direction of biodegradable hot-melt adhesive were also presented based on the literature at home and abroad.
在查阅国内外文献的基础上，对可生物降解型热熔胶提出了今后的研究和发展方向。 - Properties of fluoroelastomer/ ethylene-propylene-diene rubber blends Two-shot binding: Adhesive binding in which the first application is of PVA adhesive, the second of hot-melt adhesive.
氟橡胶/三元乙丙橡胶并用胶的性能两次胶胶装：第一次涂聚乙烯醇（白胶浆），第二次涂热熔胶的胶装方式。 - SCG-C Acoustic Pipe special adhesive shrink tube: the composite made of polyolefin and hot-melt adhesive heat shrink tube, also known as the glue tube.
声测管专用涂胶热缩管：由聚烯烃及热熔胶复合而成的涂胶热缩套管，也称涂胶管。 - Solidification mechanism and applied research of reactive polyurethane hot-melt adhesive
反应型聚氨酯热熔胶的固化机理与应用壳聚糖的硫酸/氯磺酸酯化（磺化）反应研究 - The inner surface hot-melt adhesive ensure the sealing.
内层涂敷的热熔胶保证密封可靠。 - Application of Hot-melt Adhesive in Pipeline Anticorrosion
热熔胶在管道防腐中的应用 - Study on the Hot-melt Adhesive Modified with Paraffin Wax
石蜡改性热熔胶的研究 - Influence of pinene resins on performance of EVA-based hot-melt adhesive
蒎烯树脂对EVA（树脂）热熔胶性能的影响 - One-component moisture curable polyurethane reactive hot-melt adhesive introduced in this paper consists of three parts, isocyanate-terminated urethane prepolymer, tackifying resin and stablizer.
本文叙述的单组分湿固化聚氨酯反应型热熔胶是由端异氰酸酯基聚氨酯预聚体、增粘树脂和稳定剂三部分组成。 - This paper introduces the processing methoed and application of the film, club and granule of EVA-type hot-melt adhesive
本文介绍了EVA型热熔胶膜、胶棒和胶粒加工方法及应用 - A adhesive was compounded from the thermosetting and the hot-melt adhesive, and its properties were satisfied with the requirements for military shoe production.
本研究制备了一种热固型胶粘剂与热熔胶复配而咸的胶粘剂，性能满足了军鞋生产要求。 - Development of Polyamide Hot-Melt Adhesive for Garments
服装用聚酰胺热熔胶的开发 - A Study on Preparing the Polyester Hot-melt Adhesive Powder by the Dissolving-swelling Method
聚酯热熔胶溶胀制粉法的研究 - Polyamide hot-melt adhesive is the best material for high grade garments'hot-melt liner and no string sew clothings.
聚酰胺热熔胶是目前高级服装热熔衬和无线缝纫服装的最好原料。 - Development and Application of Modified Nylon Hot-melt Adhesive
改性尼龙热熔胶的研制和应用 - This paper introduced applications of polyurethane hot-melt adhesive on shoes 、 bookbinding and so on.
最后介绍了聚氨酯热熔胶粘剂在制鞋、书籍无线装订等方面的具体应用。 - Through the reaction of polyether polyols as the basic material and many additives with polyisocyanate, an one-component polyurethane hot-melt adhesive was synthesized, which had excellent performance.
以聚醚多元醇为基本原料，辅以多种添加剂，与多异氰酸酯聚合，得到一种性能优异的反应型单组分聚氨酯热熔胶； - The hot-melt adhesive tape for clothing was prepared using PA6, LDPE and EVA as materials of base sheet and nylon copolymer as material of adhesive layer.
选用尼龙6（PA6）、低密度聚乙烯（LOPE）和乙烯&醋酸乙烯共聚物（EVA）为基片材料，共聚尼龙和天然松香为粘合层材料，试制出适用于服装用的热熔胶。 - The properties of the hot-melt Adhesive ( HMA) used EVA as base resin in Laminated Object Manufacturing ( LOM) are investigated by orthometric test, and the property affected by constituent of the HMA is analyzed.
通过正交试验，研究了以EVA为主体树脂的分层物体制造（LOM）用热熔胶的性能；分析了热熔胶中各组份对其性能的影响。 - Study on EVA hot-melt adhesive modified with SIS
SIS改性EVA热熔胶的研制 - Due to the plastication and interpenetration, SBS with mobility and miscibility were improved as a hot-melt adhesive.
通过增塑和互穿，把具有流动性和可混性的SBS改性成了热熔胶粘剂。 - Study on the technology of hot-melt prepregs A modified hot-melt adhesive was prepared by blending of EVA and SIS and adding paraffin and terpene resin.
热熔法预浸料制备工艺研究用少量SIS对EVA热熔胶进行共混改性，再与石蜡、萜烯树脂混熔制成SIS改性热熔胶。 - The results show that mixed chain-extending agents and silane coupling agent evidently increase adhesion strength of polyurethane hot-melt adhesive, but tackifying resins could not increase adhesive strength of polyurethane hot-melt adhesive evidently.
结果表明：混合扩链剂和硅烷偶联剂能明显提高聚氨酯热熔胶的粘接性能，而试用的增黏树脂对提高聚氨酯热熔胶的黏结性能效果不明显。